We can offer 1 pc Karl Mayer HKS 3-M (subject to prior sale).
1 pc Karl MAYER HKS 3-M, E28, 170”, yoc 2000, ser. No 88 xxx
-3 shafts working, working speed 1200-1300 rpm, EBA electronic warp feeding
-equipped with needles for E28.
-processed PA, PES up to 110×2 dtex.
Status: in working condition, fully equipped, stopped
Location: Central Europe (Schengen)
We can offer THIES dyeing and drying machines, laboratory apparatus UGOLINI (subject to prior sale).
– 2 Dyeing machine – Farbekessel eco-block X type 800, capacity 1064 L, temp 0/140 – (99 bobbins/machine) – yoc 2012
– 2 Dyeing machine – Farbekessel iCone type 950 Tragerl.2025, capacity 1742 L, temp 0/140 – (144 bobbins/machine) – yoc 2015
– 1 Dryer Trockenkessel a d=1058 Trl.1850 (capacity), module B+F, working temp. 0/140 – yoc 2015
– 1 Dyeing machine Farbekessel iCone type 413Tragerl.1475, capacity 258 L, temp 0/140, (18 bobbins/machine) – yoc 2015
Dim of the plastic perforated bobbins L170x55 ID, controller Thies T858
-1 Ugolini model Rapid Dryer R.D 1A, 30,0 kgs, yoc 07/15
Additionally, winders:
-SSM for the soft packages, mod PW2-W, 60 heads, yoc 2012
-CORGHI for the winding process after dyeing, 36 heads, yoc 1999, blower Electro-jet, splicer (Tex 15-40) for carton tube L 170/ 4 20
Location: Central Europe (Schengen)
Status: machines complete, in working condition
Status: in working condition, fully equipped, stopped
We can offer steamer SALVADE (subject to prior sale).
1 pc Steamer SALVADE VPM 130 mt, ww. 2200 mm, yoc 2018
working temp. 100-104o C, steam-gas.
max. capacity 130 m,
speed max. 80 m/min
installed power 18 kW
Status: excellent condition, stopped, connected
Location: Central Europe (Schengen)
We can offer REGGIANI digital printer, in excellent condition (subject to prior sale).
1 pc Digital Printing REGGIANI RENOIR 240, yoc 2018,
electronically controlled, fully equipped
-w.width 240 cm
-16 printing heads
-Gas burners 2×60 kW
-max speed 350 m/h.
Printing heads are in excellent condition.
Status: excellent condition, connected, run regularly once a week to keep the machine in working condition
Location: Central Europe (Schengen)
We can offer set of machines for production of KDK (Knit De Knit) yarn, yoc 2002 (subject to prior sale).
– 8 pcs knit machines Harry Lucas RSK POY
– 8 pcs winding machines Metex WP 42/6
Harry Lucas technical specification
40 heads E18
24 heads E14
Diameter 3,5”
POY supply coils – diameter 40 cm, thickness 13 cm
stabilization process temp. 184 o C
Processed yarn POY 300 den
final yarn KDK 220 dtex, KDK 440 dtex
Processed yarn POY 500 den
final yarn KDK 334 dtex, KDK 660 dtex, KDK 1000 dtex
Receiver reel Harry Lucas
-sleeve diameter up to 60 cm, thickness 8 cm
Winder
-conical cop up to 1,8 kg
-bobbin height 29 cm, bottom diameter 80 mm, top diam. 50 mm
Knit De Knit (KDK) yarn is a textured / modified yarn.
KDK yarn is produced on circular knitting machines with steam heat setting.
KDK yarn can be produced from Polyester, Polyamides.
The wavy structure of the yarn gives the finished fabrics a special effect (shiny, thick look).
Video: https://1drv.ms/v/s!AhA1XegTaZhFsS52blzKQjKzF0tg?e=IUvXeb
Location: Central Europe (Schengen)
Status: machines complete, in working condition
VTA sectional warper type HE 500, ww. 2600 mm, yoc 1988
-for technical yarns, creel 200 points
Status: machine in running condition, currently stopped
LASER STORK – COMPLETE LINE FOR PREPARING ROTARY SCREENS FOR PRINTING
Consisting of:
1 No laser pattern burning device STORK-STK-2010 (max. spacing between heads 2.020mm), type LE1, program for laser burning CAM 4000 (CAM SOFTWARE 4.50), yoc 1991
1 No trough for unpacking screens, total length 4.800mm
1 No screen coating device (max. length of screen 1.980mm) Stork SCR 275.
1 No vertical screen backing oven for screen length 1.980mm Stork origin
1 No cooling device for laser, ENTSCHEID type IK – V13
1 No electric glue drying device dim. 2.260x750mm
2 Nos ring sticking in screen device max. width 1980mm Stork SCR 85
Status: equipment complete in working condition
– for screens dia 640mm – 1 pc, for screens dia 914mm – 1 pc.
1 Set of computers to create the patterns
Additional:
1 No screen coating device (screen length 2.650mm) – Stork COATER RSE 3120
1 No screen backing oven for screen length 2.650mm – Stork POLYMERIZER RSE 3521
We can offer complete equipment for knit garments on STOLL flat knitting machines (subject to prior sale).
1) Knitting machines STOLL (working, complete):
1 – CMS 422TC, E12, 2440 mm (96”), 2010 yoc
2 – CMS 422TC, E12, 2440 mm (96”), 2004 yoc
3 – CMT 211, E12, 2440 mm (96”), 2003 yoc
4 – CMS330TC4, E12, 1270 mm (50”), 2002 yoc
5 – CMS 330.6, E7, 1270 mm (50”), 1997 yoc
6 – CMS 330.6, E7, 1270 mm (50”), 1997 yoc
7 – CMS 330.6, E7, 1270 mm (50”), 1997 yoc
8 – CMS 330.6, E7, 1270 mm (50”), 1997 yoc
9 – CMS 320TC-C, E3, 1270 mm (50”), 2002 yoc
10 – CMS 320TC-C, E3, 1270 mm (50”), 2002 yoc
11 – CMS 320TC-C, E3, 1270 mm (50”), 1998 yoc
Machines not complete (3 pcs):
CMS 4336, E7, 2440 mm (96”), 1997 yoc
CMS 320C, E3, 1270 mm (50”), 1997 yoc
CMS 320TC-C, E3, 1270 mm (50”), 2003 yoc
2) Sewing machines:
-JUKI buttonhole sewing machine
-SIRUBA buttons sewing machine
-JUKI buttons sewing machine
-RIMOLDI chain stitch for trimmings
-RIMOLDI lock stitch for trimmings
-KANSAI 2-needels
-3 x JUKI lockstitch
-JUKI bartacking machine
-RIMOLDI joining machine
-JASPEN chainstitch
-3 x JUKI overlock
-2 x JUKI overlock (for parts)
3) Linking machines for knitwear.
CONTI 5 – “3”
CONTI 9 – “7”
CONTI 9 – “7”
CONTI 9 – “7”
CONTI 18 – “12”
CONTI 12 – “12”
EXACTA 3 – “3”
4) Steamer NEPI OTELLO mod. PRESTIRO 94, yoc 2004 for knitwear (sweaters)
5) Steam generator COMEL mod. FB 189, 2014 + MATTEI mod. ERC1018L, yoc 2003
6) Ironing table COMEL mod. MP/F/PV 2000X1000, yoc 2018
7) Steamer NEPI OTELLO, mod. SP3/2AM, SMANICATORI, width 1800 mm, yoc 1998
8) Knife COBRO
9) Software M1+ STOL for designing knit garments (sweaters, cardigans).
Status: the factory is completely equipped, still working.
Capacity: on the set of above machines has been produced ca. 4-5.000 pcs of knit garments/sweaters per month.
We can offer complete equipment for production of socks on LONATI machines (subject to prior sale).
1) Socks machines LONATI (working, complete):
1 – LONATI mod. L462, cylinder 3 ¾, needle count 168, gauge 14, 1996
2 – LONATI mod. L462, cylinder 3 ¾, needle count 168, gauge 14, 1996
3 – LONATI mod. L462, cylinder 3 ¾, needle count 168, gauge 14, 1996
4 – LONATI mod. L462, cylinder 3 ¾, needle count 168, gauge 14, 1996
5 – LONATI mod. L462, cylinder 3 ¾, needle count 168, gauge 14, 1997
6 – LONATI mod. L462, cylinder 3 ¾, needle count 168, gauge 14, 1997
7 – LONATI mod. L472, cylinder 3 ½, needle count 156, gauge 14, 1996
8 – LONATI mod. L472, cylinder 3 ½, needle count 156, gauge 14,1997
1 – LONATI mod. GOAL FL54J, cylinder 4, needle count 200, gauge 22, 2004
2 – LONATI mod. GOAL FL626, cylinder 3 ¾, needle count 156, gauge 14, 2003
3 – LONATI mod. GOAL FL726, cylinder 3 ½, needle count 156, gauge 14, 2005
4 – LONATI mod. GOAL FL726, cylinder 3 ½, needle count 156, gauge 14, 2005
5 – LONATI mod. GOAL G726, cylinder 3 ½, needle count 120, gauge 14, 2008
6 – LONATI mod. GOAL G726, cylinder 3 ½, needle count 156, gauge 14, 2008
7 – LONATI mod. GOAL G, cylinder 3 ½, needle count 156, gauge 14, 2005
8 – LONATI mod. GOAL G, cylinder 3 ½, needle count 156, gauge 14, 2008
9 – LONATI mod. GOAL G, cylinder 3 ½, needle count 156, gauge 14, 2008
10 – LONATI mod. GOAL 900, cylinder 4 ½, needle count 84, gauge 14, 1997
1 – LONATI mod. BRAVO 842, cylinder 4, needle count 200, gauge 14, 1997
2 – LONATI mod. BRAVO 842, cylinder 3 ¾, needle count 188, gauge 16, 1997
3 – LONATI mod. BRAVO 853, cylinder 4, needle count 176, gauge 14, 1997
4 – LONATI mod. BRAVO 853, cylinder 3 ¾, needle count 168, gauge 14, 1997
5 – LONATI mod. BRAVO 962, cylinder 4 ½, needle count 84, gauge 06, 2008
6 – LONATI mod. BRAVO, cylinder 3 ¾, needle count 188, gauge 14, 1997
7 – LONATI mod. BRAVO, cylinder 3 ¾, needle count 188, gauge 14, 1997
1 – SANGIACOMO mod. FANTASIA ST, cylinder 3 ¾, needle count 156, gauge 36, 2003
2 – SANGIACOMO mod. FANTASIA 2V, cylinder 3 ¾, needle count 168, gauge 36, 2003
Machines in working condition, but to be completed:
– LONATI mod. L462, cylinder 3 ¾, needle count 168, gauge 14, 1996 – motor
– LONATI mod. L462, cylinder 3 ¾, needle count 168, gauge 14,1996 – motor
– LONATI mod. L472, cylinder 3 ½, needle count 156, gauge 14, 1996 – needles
Machines not complete (for parts)
– LONATI mod. L462/6, cylinder 3 ¾, needle count 168, gauge 14, 1998 – not compl.
– LONATI mod. GOAL FL54J, cylinder 4, needle count 240, gauge 22, 2004 – not compl.
– LONATI mod. GOAL FL54J, cylinder 4, needle count 240, gauge 22, 2004 – not compl.
– LONATI mod. BRAVO, cylinder 4, needle count 176, gauge 14, 1998 – not compl.
2) Sewing
-ROSSO for sewing tops
-3 pcs AUTOLAP YAMATO
-JUKI Overlock MO-2504-3 threads
-JUKI Overlock MO-2400-4 threads
-JUKI Overlock MO-2400-4 threads
-PFAFF for labels
-KNIFE 1982 yoc
3) Finishing machines:
-FRISAN Tumbler (washing, softening) for socks DRY-SOFT 33 mod. DS-33, max press. 4kg
(for extra soft silicon finish)
-Socks boarding/stabilising machine FIRSAN mod. F-830, yoc 2000, with 8 forms;
capactity of boarding machine 1.000 pcs per 8 h. Forms 23/24; 27/28
Capacity: on the set of above machines, it has been produced ca. 50-80.000 pcs of socks per month.
Status: the factory is completely equipped, still working.
Open width Compactor SANTEX SANTACOMPACT 240, 2004 yoc, opnen width knit fabrics 2400 mm.
Status: working; both machines full option, in excellent technical condition; professionally maintained
Link to video below.
1 pc THIES type TEX 1932L for yarn, (iCone Type 1050) HT
-load capacity 196 kg,
-yoc 2017
-volume 1,93 m3,
-temp. 140oC, pressure 5 MPa,
-controler T858
-bobbins 2,1 kg
Dyeing tank, additional tank for preparing chemicals.
Machine was used for dyeing: synthetic yarns, Polyester, Polyamide, Viscose
More information in enclosed documentation.
Diameter of dyeing container: 1050 mm
Carrier length: approx. 1869 mm
Nominal capacity: approx. 196 kg PES
Operating temperature: up to 140oC
-Closed dyeing container with rapid lock device
-Accommodation and fixing device for material carriers
-Compressed air inlet/outlet
-Pressure monitoring
-Rinse valve
-Safety valve
-Flow optimized liquor reversal with minimum pressure losses
-Circulation pump incl. motor
-Heating coil integrated in the bottom of the container
-Heating and cooling valves with continuously regulated proportional valve
-Piston control valves, stainless steel condensate/cooling water outlet
-Analog level for dyeing container
-Water inlet valve
-Water meter MID
-Drain valve
-Pneumatic unit/control block
The machine can be used for conventional long liquor processes as well as
for short liquor operation – according to the characteristic properties of the textile goods.
Material Carrier “Vertical System” Type 1050
With each 18 welded pipe spindles D=55 mm x 1402 mm
For accommodation of 2,3,4,5, packages per spindle
Capacity carrier:
Approx. 196 kg = 90 cylindrical packages on insertable tube
Material: Polyester
Status: machine complete in excellent condition, stopped.
1 pc Direct warper type DS.50/32 NC-1,1997 yoc
-for warp beams 2×21 “or 1×42” (adjusting from one option to another within 30 min.)
-speed from 200 to 1200 m / min
-computer, type 52C
-creel type GN/GM for 1200 points / bobbins
-yarn tension equalizer type WA ¾ Q
-CAMSCAN 5201.1 device controlling the yarn band and the number of threads
-storage type GS 21-84 (low run forward and back 30 m / min)
-waxing type QA
-reed (55 elements, each one inch).
Processed yarn: 68 to 167 dtex.
Status: working, well maintained.
4 pcs BECK (Orizio) Interlock circular knitting type BIM 2 -3.21M, yoc 2017-2018
-Manufacturer: BECK KNITTING MACHINES, Germany
-diam 30”, E20
THIES-DOFAMA type BC21, 150oC, 3.822 m3, 0.35 MPa, yoc 2000, 3-tubes
Capacity ca. 450 kg (3×150 kg); possibility to work with 1, 2 or 3 tubes.
1 pc THIES SOFT-TRD 140/3 NORM RE, 450 kg, 2002 yoc
– 3 tubes, 3 ropes, *1 nozzle, 450 kg (possible to dye 2 ropes 300 kg)
1 pc THIES SOFT-TRD 140 NORM, 450 kg, 1998 yoc
– 3 tubes, 3 ropes *1 nozzle, 450 kg (possible to dye 1 rope 150 kg)
2 pcs Reggiani digital printers mod. ReNOIR Plus 180/16 Module 2, (1 lot)
– yoc 2012, working width 180 cm
– max 8 colours, 16 heads, gas dryer
– EL Elsmart, Touch Simatic Multi Panel Siemens,
– entry Aroll/trolley, exit folding on trolley.
– speed max 180 m2/h
BENNINGER KUESTERS Dyeing Station Type DyePad-KTZ 222.22 (cold pad)
– year 2015
– w.width 2200 mm
with automatic colour kitchen Dosing Station CONTIDOS SF5 and with station for rotating batch of fabric (after dyeing).
Status: complete equipment for dyeing, dosing etc. in excellent condition; equipment is running
STORK CT4 printing machine
– width 185 cm, yoc 1987
– 2 colours (for screens 640 mm)
– 1 dreyer, steam heated
– entry: A-frame, plaiter / exit: plaiter
– 2 pneumatic pumps (suitable for delivery thick pastes)
KARL MAYER Raschel Jacq. RJSC 4F-NE, made Germany
1 pc RJSC 4F-NE, E7/14 130”, yoc. 1997 + creel
1 pc RJSC 4F-NE, E14 130”, yoc. 1997 + creel
1 pc RJSC 4F-NE, E18 130”, yoc. 1996 + creel
1 pc RJSC 4F-NE, E9/18 130”, yoc. 1996 + creel
Status: working (production of jacquard curtains).
MCS Open width washing machine STAR-WASH 2G-36 TAV.3600, 2017 yoc
-2017 yoc
roller width 3600 mm
fabric width 3400 mm, min. fabric width 700 mm
Bianco hydro extractor, Conroler Termoelectronica
mech. speed up to 50 m/min – мех. скорость, electric supply 3x480V, 60 HZ
Fabric contents:
fabric inlet group Mod. EN400 – 5 m
washing unit Mod. STAR-WASH-FS – 5 m
plaiter on exit Mod. UF17 – 5 m
Dimensions: L 8015 mm x max.W 4600 mm
Status: running
BENNINGER SUPERTRONIC 240 sectional warper type SF-P,
warping width 240 cm, 800 m/min, creel 560 points, gauge 20 cm
Yarn processed: PES dtex 608/24, 75/36×1, 150/48×1, 150/48×2, 220/144
Status: complete, installed, in running condition
ERBATECH open width washing range SCOUT 180, yoc. 2011
– working width 2600 mm; rollers width 2800 mm
– feeding from plait/fold
– delivery for plait
– prewashing, bleaching, padding, steaming, neutralising
– for knit fabrics
Status: machine complete, working, in excellent condition
3 pcs ZSK German embroidery machine YCF 4405-24/4T/1400, yoc 2004,
– 44 heads, 5 needles, 850 rpm, embroidery area: 16 cm x 120 cm
Status: machines in excellent condition.
SSM DP3-C Intermingling (air covering), yoc 2014, 10 spindles, controller SSM MT2
High performance winder with the production of air entangled yarns, with elastomer core, model DP3-C DIGICONE preciflex, with 10 spindles.
Material: Filament yarns, Elastane, yarn count: max. 3.000 dtex
Traverse length: 100-250 mm infinitely variable
Take up package diam.: up to 280 mm
Take up tubes: cylindrical, max. length 290 mm, min. basic dia. 43 mm
Type of application: Air Covering / Intermingling
Winder FADIS mod FAST/R.S,
– 6 spindles, yoc 2001, cone size 290 mm.
– excellent condition, voltage – 380V
LORIS BELLINI Laboratory dyeing HP, yoc 1999, capacity 0,5 kg (1 bobbin),
temp. 150o C, 4 bar, batch 500g, 1kW, dye preparation tank, control panel, for PES yarn.
ATYC type RAPIDSTRETCH-RS-3 (3 tubes) dyeing machine, yoc 2003
135oC, 6 Bar, 2353 l, capacity: 150 kg each tube; dyeing in 1, 2 or 3 tubes
Dyeing machine THIES TRD type 140/1 (one tube), capacity 250 kg, yoc 2003
volume 8,2 m3, controler T 737 XL, power 27 kW, one tube
2 pcs Dyeing machines Laip 900 HT, mod. 2 CORDE, yoc 2000, capacity 9500 L
2 pcs Dyeing machine THIES BC 12, 1996 yoc, capacity 250 kg
volume 12m³, controler Sedomat 2000, power 35-55kW
Dyeing machine THEN AIRFLOW AFS 450, 1995 yoc, capacity 250 kg
volume 12m³, controler Datacomp AMC-E, power 35-55kW
1 pc Dyeing machine ITM (for yarn) TEX440L, 1995 yoc, capacity 40 kg, 21 bobbins;
Volume 0,775 m³, controler ATC 304, power 7,5kW
1 pc Dyeing machine ITM (for yarn) TEX440L, 1995 yoc, capacity 80 kg, 42 bobbins;
Volume 0,44 m³, controler ATC 304, power 14kW
Dyeing machine LONG (for yarn) TEX5600L, 1987 yoc, capacity 500 kg, 180 bobbins;
Volume 5,6 m³, controler PC 3000, power 75kW
HUBTEX KHW-S/1500 cloth rolls trolley, load 1500 kg, yoc. 1997
2 pcs Oil compressors ATLAS ZR355 yoc 2002/2003
400V, 355 kW, pressure: 7.5 bar, capacity : 56.94 M3 / min
Total hours: 65 878 h, last checking by Atlas Copco 22.03.2019
Inspection, doubling and piling machine MENSCHNER MMS, 200 cm, 1988 yoc.
Tubular Compactor SANTASPREAD SANTEX, yoc. 1995
– working width 120 cm
– feeding from plait/fold
– delivery: folding-measuring unit
– steam 2 bar
– processed: cotton knit fabric, tubular 100 cm width
– machine complete, ready to work, stopped
Cold batch dye padder KUESTERS
– yoc 1990 г.
– working width max. 170 cm
– feeding from plait or big roll / delivery: big roll
– possibility to heat the bath
– processed: cotton fabric 160 cm width
– machine complete, ready to work, stopped
1 pc DORNIER LWV 4/J Jacquard air jet loom, yoc 1999, w.w 210 cm
yoc. 1999, w.width 210 cm, 4 colors, STAUBLI dobby CX880, format 1408, 9985 threads
1 warp beam, 1 cloth roller, 10.000 droppers, warp stop device,
1 pc DORNIER LWV 4/J Jacquard air jet loom, yoc 1999, w.w 210 cm
STAUBLI CX880, 4 feeders ROJ Super ELF G2, 1 warp beam, 1 cloth roller, 1 reed, 9985 heddles, 9985 droppers, warp stop 6 rails, Controler JC5, 448 rpm, density 50 /cm
1 pc DORNIER LWV 4/J Jacquard air jet loom, yoc 1999, w.w 210 cm
STAUBLI CX880, 4 feeders ROJ Super ELF G2, 1 warp beam, 1 cloth roller, 1 reed, 9985 heddles, 9985 droppers, warp stop 6 rails, Controler JC5,336 rpm, density 40 /cm
1 pc DORNIER HTVS 4/J rapier jacquard loom, yoc 1999, w.w 210 cm
yoc. 1999, w.width 210 cm, 4 colors, STAUBLI dobby CX880, format 1408, 9985 threads, 1 warp beam, 1 cloth roller, 10.000 droppers, warp stop device,
2 pcs DORNIER LWV 4/J Jacquard air jet loom, yoc 1999, w.w 190 cm
yoc. 1999, w.width 190 cm, 4 colors, STAUBLI dobby CX880, format 1408, 16389 threads
yoc. 1999, w.width 190 cm, 4 colors, STAUBLI dobby CX880, format 1408, 7280 threads
each: 1 warp beam, 1 cloth roller, 1×16.500 droppers, 1×10.000 droppers warp stop device,
1 pc DORNIER LWV 4/J Jacquard air jet loom, yoc 1999, w.w 190 cm
STAUBLI CX880, 4 feeders ROY Super ELF G2, 1 warp beam, 1 cloth roller,1 reed,
5940 heddles, 5940 droppers, warp stop 6 rails, Controler JC5, 448 rpm, density 30 /cm
1 pc DORNIER LWV 4/J Jacquard air jet loom, yoc 1999, w.w 190 cm
STAUBLI CX880, 4 feeders ROY Super ELF G2, 1 warp beam, 2 cloth rollers,1 reed,
8000 heddles, 8000 droppers, warp stop 6 rails, Controler JC5, 448 rpm, density 30 /cm
2 pcs DORNIER AWS 4/S air jet loom, yoc 2001, w.w 360 cm
yoc. 2001, w.width 360 cm, 4 colors, STAUBLI dobby 2861/2, 16 levers
10 heald frames, 2 warp beams (split beams), 1 cloth roller, 10.000 droppers, warp stop device,
1 pc DORNIER LWV 4/E air jet loom, yoc 1998, w.w 320 cm
yoc. 1998, w.width 320 cm, 4 colors, STAUBLI dobby 2861, 16 levers
10 heald frames, 2 warp beams (split beams), 2 cloth rollers, 10.000 droppers, warp stop device
2 pcs PICANOL OMNI PLUS SUMMUM 6J Jacquard air jet loom
yoc. 2017, w.width 360 cm, 6 colors, STAUBLI dobby SX, format 2688, 17800 threads
yoc. 2017, w.width 360 cm, 6 colors, STAUBLI dobby LX, format 5210, 17800 threads
each: 2 warp beam, 1 cloth roller, 18.000 droppers, warp stop device.